Pkm IN4-DA-2FZA++A Bedienungsanleitung Seite 102

B
G
3. Lift the induction hob (2) at an angle and slide it carefully into the prepared
installation opening in the worktop (s. fig. below / installation clearance at the
bottom: min. 220 mm / base height: min. 100 mm / vertical clearance at the rear:
130 mm). Ensure that the front and rear of the induction hob are positioned
correctly.
4. Cut the plastic tube* for the vertical connection to the required length and
connect it to the 90° curve* (see fig. below). Seal the connection with adhesive
tape (see fig. below).
W
ATER CONTAINER
C
URVED CONNECTING PIECE
(90°)
~
102
~