probst SH-2500-UNI-B Betriebsanleitung Seite 119

Security
16. Ensure that the entire surface of
the suction plate(s) rests on the
load.
17. Press the lock button
the manual slide valve (8) spring-
loaded in the direction of .

The load is sucked in.
18. Before lifting, ensure that the load is not stuck or tilted.
19. As soon as the warning tone has gone off (vacuum above -0.6 bar), carefully
lift the load (actuate the lifting aid in the feeder).
20. Use the operating handle to compensate for any swinging movements.
21. Immediately after picking up (e.g. from a pallet or
lorry), lower the load to just above the floor (approx.
20 to 30 cm).
22. Attach the load securing chain
(11) to the suspension hook
(13).

The load securing chain must be in close contact with the load
52400043
and push
33 / 47 GB