Precor Discovery Series Selectorized Line Benutzerhandbuch Seite 55

3. Fit the weight tower to the movement frame by sliding the supports over
the transition plates.
Figure 4: Fit the frame together
4. Attach the cross support to the movement frame using the bolts and
washers removed previously. Partially tighten the fasteners.
Figure 5: Cross support attachment to movement frame
Seated Dip Assembly Guide: Assembling the Equipment
5. Attach the base support to the movement frame on the underside using
the bolts and washers removed previously. Partially tighten the fasteners.
Figure 6: Base support to movement frame attachment
5