Herunterladen Inhalt Inhalt Diese Seite drucken

Material Damage; Unpacking And Setting Up - Silvercrest SDG 800 B2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SDG 800 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 108
RP42772-Dampfgarer LB4 Seite 6 Dienstag, 8. Oktober 2013 6:34 18

4.7 Material damage

Warning! Follow the instructions below to
prevent material damage.
• Never operate the steamer without
water.
• Ensure that there is never too much or
too little water in the appliance. Read off
the water level on the water level
indicator 13. It should always be
between MAX (1.2 l) and MIN (0.2 l).
• Only place the appliance on a level,
dry, non-slip surface so that the
Note:
As
the
appliance/the
generator 11 are supplied lightly greased,
a little odour and smoke may develop
when the appliance is used for the first time.
This will not cause any damage and will
stop after a short time. Please ensure
adequate ventilation during this process.
1. Remove the individual parts from the
packaging.
2. Check that the individual parts are
complete (see "1.2 Scope of supply" on
page 2) and are undamaged.
3. Clean the appliance thoroughly before
using it
for
the first
"10. Cleaning
and
page 15).
4. Place the appliance on a level, dry, non-
slip surface so that the appliance can
neither fall over nor slide off.
5. Pour 0.25 l of clean drinking water into
bottom part 12.
6. Put
steam
sleeve
generator 11. The narrow end of steam
sleeve 8 must face upwards.
7. Put collector 7 in bottom part 12.
6
appliance can neither fall over nor slide
off.
• Do not place the appliance immediately
underneath a suspended cupboard, as
steam escapes upwards and might
damage the furniture.
• Do not place the appliance on a hot
cooking ring.
• The appliance and accessories may not
be put in a microwave oven.
• Use only clean drinking water to
generate steam.

5. Unpacking and setting up

steam
8. Place steamer baskets 5 on bottom
part 12:
– ensure that the steamer baskets are in
9. Place rice tray 4 in the top steamer
basket.
10.Place lid 3 on the top steamer basket.
time
(see
11. Insert the power supply plug in a
storing"
on
suitable earthed power supply socket
(see "3. Technical data" on page 3).
12. Select a cooking time of 5 - 10 min. on
time selector 14.
The appliance starts heating up and
operating display 15 comes on.
13.Allow the appliance to cool down once
8
on
steam
the set time has elapsed and then clean
it again (see "10. Cleaning and storing"
on page 15).
The appliance is now ready to use.
the right sequence, as they are slightly
different sizes. Steamer basket 1 is
always on the bottom, steamer basket
2 on top of it and steamer basket 3
right on top. The number of the
steamer basket is shown on its
handles.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis