System Information; Time Selection - Merck RCS High Flow Touch Bedienungsanleitung

3. 1 0. 1 System Information

Touching the Option icon followed by the
System icon provides access to the Menu System
Information. Here, the following information is
displayed (upper to lower):
• Serial number of the RCS
Microbial Air Sampler
• Software version (VISU)
• Firmware version
• Total battery capacity
• Actual battery charging status
• Number of remaining measurements (right) as
per selected sampling volume (left)
NOTE
• The instrument is supplied with a partially
charged battery. Prior to first use it is recom­
mended to fully charge the battery.
• Throughout the first charging cycles the total
capacity of the battery may slightly increase
®
High Flow Touch

3. 1 0.2 Time Selection

Touching the Option icon followed by the
Time icon provides access to the Menu Date/Time.
The time is displayed in the format hh:mm:ss. For
adjustment the respective area is touched for acti-
vation, then changed by using the arrows
The format of the time can be changed between
a 12 hour format and a 24 hour format. Therefore,
the area 12 h/24 h is touched and the new setting
is saved. The changed time format is displayed in
the lower status bar.
The date can only be changed with the RCS
agement Software. The new date is then transferred
to the instrument via the RS232 interface.
Save new data and return to the Main Menu.
One step back (Menu Option).
Return to Main Menu (Abort)
NOTE
It is recommended to change date and time with
the RCS ® Management Software and transfer the
new data to the instrument via the RS232 inter­
face.
®
Man-
79