Merck RCS High Flow Touch Bedienungsanleitung Seite 77

HYCON-ID
Data Selection
By touching the HYCON-ID icon and then, the
Data Transfer icon the amount of stored data is
displayed. The data is then transferred from the
®
RCS High Flow Touch Microbial Air Sampler to the
HYCON-ID software on a PC.
Abbreviations displayed by the instrument:
Agar: Identification of agar strips
User: Identification of the user
LOC: Identification of the sampling point
DF1: User defined information
DF2: User defined information
Save the new settings and return
to the Main Menu.
One step back (Menu HYCON-ID).
Back to Main Menu (Abort).
NOTE
The transfer of the data »Agar« is the primary
identification of the sampling data. This function
can not be switched off.
Stored Sampling
Data
Touching the HYCON-ID icon and then the
Data Transfer icon leads to the submenu Stored
Sampling Data.
This menu displays the number of stored sampling
data. The stored data can be transferred to the HY-
CON-ID Software on a PC via the integrated blue-
tooth module. The transfer is started from the PC.
After transfer, it is recommended to delete the
stored sampling data from the instruments' memo-
ry by using the HYCON-ID Software.
Transfer of Data
via Bluetooth Connection
The symbols indicate the transfer of data via
bluetooth.
NOTE
The Bluetooth connection is displayed in the upper
status bar of the main screen.
77