Interval Sampling - Merck RCS High Flow Touch Bedienungsanleitung

3.9.3 Interval Sampling

Touching the Interval Sampling icon from the
Menu Setting provides access to the Menu Interval
Sampling for verification of parameters and the ac-
tivation of the interval sampling procedure. The pa-
rameters for the interval sampling procedure are
®
programmed with the RCS
In this example the following interval sampling
procedure is displayed:
- Sample volume of 100 L
- 8 intervals
- Time period of 10 minutes
For activation of the interval sampling mode the
ON/OFF icon is set to ON (magenta). The icon
for
Interval Sampling is displayed in the Main Menu.
Activation of interval sampling.
Saving new data is not allowed.
One step back (Setting Menu).
Go back to the Main Menu (Abort).
NOTE
The interval sampling mode is programmed with the
RCS
serial RS232 interface. If no interval sampling data
have been transferred activation of this mode is not
Management Software.
possible.
® Management Software and transferred via the
75