Fronius Robacta Bedienungsanleitung Seite 64

1.
2.
3.
4.
Disposal
Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally responsible manner in accordance with the EU Di-
rective and national law. Used equipment must be returned to the distributor or
through a local, authorised collection and disposal system. Correct disposal of
the used device promotes sustainable recycling of resources and prevents nega-
tive effects on health and the environment.
Packaging materials
-
-
-
64
Insulating parts
- Notches
- Burned off or torn middle bar
- Scorched or torn-off shoulders
Nozzle fittings
- Notches and burns on the front edge
- heavily covered in welding spatter
Spatter guard
- Burned-off outside edges, notches
Contact tubes
- Worn out (oval) wire entry and wire exit holes
- Heavily covered in welding spatter
- Burns on the tip of the contact tube
Collect separately
Observe locally valid regulations
Compress the cardboard box to reduce volume