Fronius Robacta Bedienungsanleitung Seite 41

WARNING!
Danger from contact with toxic welding fumes.
This can result in serious personal injuries.
▶
Always extract welding fumes.
▶
Ensure an adequate supply of fresh air. Ensure that there is a ventilation rate
of at least 20 m³ (169070.1 US gi) per hour at all times.
▶
If in doubt, a safety engineer should be commissioned to check the pollution
level in the workplace.
CAUTION!
Danger from operation without coolant.
This can result in damage to property.
▶
Never operate water-cooled welding torches without coolant.
▶
During welding, ensure that the coolant is circulating correctly – this will be
the case for Fronius cooling units if a regular return flow of coolant can be
seen in the coolant container of the cooling unit.
▶
The manufacturer will not be liable for any damages due to non-observance
of the above mentioned points. All claims against the warranty are void.
English
41