Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety
Unauthorised modifications and spare parts
Changes or modifications are not permitted without prior, written permission from Ecolab
Engineering GmbH and shall result in the forfeiting of any and all warranty entitlements.
Original spare parts and accessories approved by the manufacturer heighten the degree
of safety. Accessories must also be approved by Ecolab. The use of other components will
invalidate Ecolab's warranty.
CE conformity
In the case of subsequent conversions, the CE Conformityof the entire system
must be re-evaluated and a new certificate issued before recommissioning.
2.3
Safety measures taken by the operator
Observe the workforce requirements set out in the Detailed Operating Instructions
(MAN048621).
2.4
Personnel requirements
Observe the workforce requirements set out in the Detailed Operating Instructions
(MAN048621).
2.5
Metering media
CAUTION!
Use of metering media:
– The console may be used only with products validated by Ecolab. We do
not accept liability if products that have not been validated are used.
– The metering media are procured by the operator.
– The owner will bear sole responsibility for correct handling and the
associated risks.
– The hazard warnings and disposal instructions are provided by the
operator.
– Wear suitable protective clothing (see safety data sheet).
– All safety regulations must be followed and the information contained in the
safety data sheet/product data sheet must be observed.
WARNING!
Injuries from uncontrolled chemical spills
Uncontrolled chemical spills can cause serious injuries. Use the personal
protective equipment (PPE) specified in the safety data sheet for the chemical
products.
MAN048084 Rev. 02-03.2024
Ä
'Available instructions' on page 3
Ä
'Available instructions' on page 3
16
Werbung
