Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and assembly
6.
Push the hose onto the connection nipple up to the conical part.
7.
Move the clamp onto the tapered part until you feel resistance.
8.
Tighten the clamping piece screw.
9.
Place the O-ring in the groove of the suction/pressure valve.
10. Install the suction lance adapter for the different package sizes.
11. Slide the suction lance through the conical suction lance adapter.
12. Install the PVDF protective sleeve at the end of the suction lance.
13. Adjust the height of the suction lance according to the selected packing size.
MAN048084 Rev. 02-03.2024
CAUTION!
Select a suitable O-ring according to the metered chemicals used to
ensure product compatibility with the sealing ring!
36
Werbung
