Comfee Smart Cool 7000 Plus Benutzerhandbuch Seite 30

Drainage guide
Dehumidifying Mode Drainage Guide
Step 1:
Remove the
Step 2:
drain plug
Install the continuous
drain hose
During dehumidifying modes, remove the drain plug from the back of
the unit, install the drain connector (5/8" universal female mender) with
3/4" hose(locally purchased). For the models without drain connector,
just attach the drain hose to the hole. Place the open end of the hose
directly over the drain area in your basement floor.
NOTE:
Make sure the hose is secure so there are no
leaks. Direct the hose toward the drain,making sure that
there are no kinks that will stop the warter flowing. Place
the end of the hose into the drain andmake sure the end
of the hose is down to let the water flow smoothly. When
the continuous drain hose is not used, ensure that the
drain plug and knob are installed firmly to prevent
leakage.
Water collection tray Drainage Guide
When the water level of the bottom tray reaches a predetermined level,
the unit beeps 8 times, the digital display area shows "P1" . At this time
the air conditioning/dehumidification process will immediately stop.
However, the fan motor will continue to operate(this is normal).
Carefully move the unit to a drain location, remove the bottom drain
plug and let the water drain away. Reinstall the bottom drain plug and
restart the machine until the "P1" symbol disappears. If the error repeats,
call for service.
NOTE:
Be sure to reinstall the bottom drain plug firmly
to revent leakage before using the unit.
28
Remove the
bottom
drain plug
EN