Pari eFlow rapid nebuliser system Gebrauchsanweisung Seite 32

K Troubleshooting
# Controller Screen
Display
5.
6.
Controller Signal When Failures Occur and Action is Required
# Controller Screen
Display
7.
8.
30
Display Symbol/ Condition
Controller Sound
Flashing Normal: The device was
alternating signal turned off.
tone
Steady Normal: The easycare mode
was selected.
Display Symbol/ Condition
Controller Sound
Flashing • Bad or missing connection. • Ensure, that all parts are
alternating signal
tone
Flashing • No drug detected.
alternating signal
tone
®
eFlow rapid nebuliser system – Questions about your device? Contact your service partner
Action Required
If the device was switched off
manually and medication
remains, restart the controller.
No action required. The
easycare is connected and
working properly.
Action Required
connected tightly.
• Replace aerosol head and/or
the connection cord, if
defective.
• Restart treatment by pressing
ON/OFF button.
• If the condition persists,
contact your service partner.
• Add drug, if necessary.
• Hold the nebuliser handset
level and restart treatment by
pressing the ON/OFF button.