Pari eFlow rapid nebuliser system Gebrauchsanweisung Seite 16

E Cleaning Your Nebuliser Handset
Note: If necessary, clean the membrane of the aerosol head with
the easycare cleaning aid (not more than twice a week). Follow
the easycare instructions for use.
Step E6 Enter the easycare mode.
Press and hold-down the ON/OFF button (Fig. E6)
on the controller until the easycare screen appears
(Fig. E6b), then release the ON/OFF button. You
will hear one "beep" and see the easycare
cleaning screen (Fig. E6c).
Fig. E6a
Step E7 After backwashing follow the instructions provided
in chapter F for disinfecting your nebuliser handset
parts and the aerosol head.
14
Fig. E6b
Hold ON/OFF
button until
easycare
screen
appears
®
eFlow rapid nebuliser system – Questions about your device? Contact your service partner
Fig. E6
Release
ON/OFF
button
Fig. E6c