Pari eFlow rapid nebuliser system Gebrauchsanweisung Seite 29

Step J2 Change backlight settings. In the first step, you
can make changes to the backlight. By repeated
pressing of the ON/OFF button you can choose
between the options "Default" (Fig. J2a), "Backlight
always ON" (Fig. J2b) and "Backlight always OFF"
(Fig. J2c). In the delivered state, the option
"Default" is selected: Backlight switches on for
1 second when button is pressed, or the device
status changes.
Step J3 Apply preferred setting. Navigate to your pre-
ferred setting. Wait until the controller automatically
saves the selection after a few seconds. The
controller confirms this with a checkmark (Fig. J3).
®
eFlow rapid nebuliser system – Questions about your device? Contact your service partner
EN
J
Fig. J2a
Default
Fig. J2b
Backlight always ON
Fig. J2c
Backlight always OFF
Fig. J3
en
Controller Settings
27