F Disinfecting Your Nebuliser Handset - Pari eFlow rapid nebuliser system Gebrauchsanweisung

F Disinfecting Your Nebuliser Handset

Note: Clean your nebuliser handset before disinfecting your nebuliser handset. The nebuliser handset cannot be
disinfected effectively unless it has been cleaned beforehand.
Method 1 (preferred): Thermal Disinfection (boiling)
Disinfect the nebuliser handset parts by boiling in distilled water.
Step F1 Fill a clean pot with enough distilled water to fully
cover all parts.
CAUTION
Plastic may melt if it comes into contact with the
hot bottom of the pot unless there is enough water
in the pot.
Step F2 Bring the water to a boil.
Step F3 Add the disassembled parts, including the aerosol
head and boil for a full 5 minutes.
Step F4 Remove the parts after the water has cooled and
shake the parts to remove excess water.
®
eFlow rapid nebuliser system – Questions about your device? Contact your service partner
EN
F Disinfecting Your Nebuliser Handset
Fig. F3
en
15