Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care and maintenance
Care and maintenance
WARNING
Risk of injury!
Touching live parts may result in severe
injury or death.
Before cleaning the exhaust hood or
n
changing the filter, pull out the mains
plug. If the mains plug is difficult to ac-
cess, switch off or pull out the corres-
ponding fuse.
CAUTION
Fire hazard!
Improper handling of the appliance or in-
correct maintenance can result in grease
residue catching fire. There is a risk of
fire if the appliance is not cleaned prop-
erly in accordance with the instructions.
Grease residue on the exhaust hood
n
or in the grease filters can catch fire if
exposed to high temperatures. For this
reason, clean the surfaces of the ex-
haust hood and grease filters regu-
larly.
Cleaning the housing
We recommend cleaning the surfaces of
the exhaust hood after every use.
– Wipe the surfaces with a soft, damp
cloth and a little dishwashing detergent.
– Clean glass surfaces with standard
glass cleaner.
Cleaning the grease filters
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 60 °C), or soak in lukewarm
water with detergent.
1. Unplug the mains plug or switch off the
corresponding fuse.
(19)
(18)
2. Open the lock (19) on one grease filter
(18) and carefully remove the grease fil-
ter.
3. Repeat this step for the second grease
filter.
4. Wash the grease filters (18) in a dish-
washer or in the sink like ordinary dish-
ware.
(18) (19)
5. Place a grease filter (18) with the pins
into the openings.
6. Slide the lock (19) downwards.
7. Close the grease filter (18) and release
the lock.
8. Repeat the last two steps for the
second grease filter.
9. Switch the power back on.
Page EN-19
Werbung
