Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Interface
P9
PA
P9
PC
PA
U0
PC
ENGLISH
U1
U2
U0
Notes for disposal
Most of the packaging materials are recyclable. Please dispose of them according to the disposal methods
U3
U1
in your country.
If you wish to dispose of the air conditioning system please contact qualified personnel for the removal of
U4
U2
the plant and then contact the ' local authority of management of waste for proper disposal.
IT IS MANDATORY TO CARRY OUT ANNUAL MAINTENANCE PROVIDED FOR BY THE REGULATIONS IN FORCE,
U5
U3
WITH THE USE OF A QUALIFIED SPECIALIZED TECHNICIAN ..
U6
Remove the device
U4
Error codes
Operate as below
U7
U5
4. Press "Air conditioner" to enter the menù
Error codes in the units equipped with displays or in the displays
5. Press "
U8
U6
of the remote controls combined with the indoor units
6. Press "Remove device" to remove the conditioner.
U9
U7
The systems and electronics use operating algorithms and detection probes that can identify any operating
A2
anomalies.
U8
A3
The table with all the error codes that can be highlighted on the 2-digit display of the indoor unit is shown.
U9
Error codes highlighted on the units with luminous operating
A2
A3
LEDs
Error code
CL
df
E0
Infrared receiver
E1
E2
Infrared receiver
Stand by
Cooling
E3
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
E4
Stand by
Cooling
E5
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
E6
76
PFC protection
Unit internal and units outside not
compatible
PFC protection
Conflict mode
Unit internal and units outside not
Sensor of temperature air unit internal
compatible
damaged
Sensor of temperature battery units internal
Conflict mode
damaged
Sensor of temperature air unit external
Sensor of temperature air unit internal
damaged
damaged
Conditioner off
Sensor of temperature battery units external
Sensor of temperature battery units internal
damage
damaged
Sensor of temperature pipe unit external
Sensor of temperature air unit external
damaged
damaged
Sensor of temperature battery units external
Damaged IPM temperature sensor
damage
Sensor of temperature pipe unit external
Liquid tube temperature sensor damaged
damaged
Damaged gas pipe temperature sensor
Damaged IPM temperature sensor
Damaged compressor discharge
"
Liquid tube temperature sensor damaged
temperature sensor
Wired control temperature sensor error
Damaged gas pipe temperature sensor
Phase of the wifi configuration procedure
Damaged compressor discharge
Phase of the wifi configuration procedure
temperature sensor
Wired control temperature sensor error
Phase of the wifi configuration procedure
Phase of the wifi configuration procedure
Description
Indoor unit filter cleaning reminder
Defrosting or oil return to the compressor
Press "Air
conditioner" to
High temperature protection at the
enter the menù
compressor outlet
Protection of overload / Protection of
Status led
overheating
Led color
Compressor overload protection / Excessive
absorption protection
Freeze protection
Status led
Led color
COMMERCIALE@TEKNOPOINT.COM – WWW.TEKNOPOINT.COM
COMMERCIALE@TEKNOPOINT.COM – WWW.TEKNOPOINT.COM
Protection overpressure system
MUI_UNITÀ INTERNA DELFIN_Ita_Eng_Fra_Deu_SKY/Rev.00/Data 03.06.2020
MUI_DELFIN_Ita_Eng_Fra_Deu_SKY/Rev.00/Data 03.06.2020
Protection under pressure system
Loss of coolant / protection valve expansion
COMMERCIALE@TEKNOPOINT.COM – WWW.TEKNOPOINT.COM
Conditioner on
Heating (RED)
Heating (RED)
Press "
"
Timer (YELLOW)
Operation
GREEN
YELLOW
Timer (YELLOW)
Operation
GREEN
YELLOW
48
63
Switch off the system and contact
the installer
Switch off the system and contact
the installer
Mode of operation is not enabled.
Switch off the system and contact
Of units in the multi split in
the installer
conflict of mode.
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Mode of operation is not enabled.
Switch off the system and contact
Of units in the multi split in
the installer
conflict of mode.
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Share the device:
Switch off the system and contact
Switch off the system and contact
Press "
the installer
", than press
the installer
"Share device"
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Switch off the system and contact
Switch off the system and contact
the installer
the installer
Complete the procedure
Switch off the system and contact
Complete the procedure
the installer
Switch off the system and contact
the installer
Operation (GREEN)
Complete the procedure
Complete the procedure
Resolution
Operation (GREEN)
Ensure the cleaning and the filters
Switch off the system and contact
the installer
Press "Remove
Switch off the system and contact
device" to
ON-OFF
the installer
remove the
Switch off the system and contact
conditioner.
Timer
Heating
the installer
RED
Switch off the system and contact
ON-OFF
the installer
Switch off the system and contact
the installer
Timer
Heating
Switch off the system and contact
RED
the installer
Switch off the system and contact
the installer
Switch off the system and contact
the installer
ENGLISH
ENGLISH
Werbung
Inhaltsverzeichnis
