Tekno Point DELFIN DLF-09 Benutzer- Und Installationshandbuch Seite 61

Buttons on remote controller
I FEEL button
Press this button, you can select the I FEEL function on and off. The first power on, I FEEL function default is off. Press this button, I FEEL icon appear
and I FEEL function is on, press this button again, close the I FEEL function and I FEEL icon disappear.
Note:
Please put the remote controller near user and confirm the unit can receive the remote code when this function is set. Do not put the remote
controller near the object of high temperature or low temperature in order to avoid detecting inaccurate ambient temperature.
15. Press " Confirm " after entering the password.
Introduction to the function of combination Buttons
Child lock setting and unlocking
● In the state of turning on or turning off the machine, hold down the " " button and " " button at the same time, enter the "Child lock"
function to lock or unlock the remote control buttons, after locking, the CHILD lock icon is displayed. At this time, by operating any button, the
CHILD lock icon will blink three times without sending signal to the unit.
● After unlocking the buttons, the CHILD lock icon is not dispayed. After powered on, the default is unlock.
°F and °C temperature switch
In the state of turning off, holding down the "MODE" and " " button, switch between °C and °F.
Low temperature heating function setting
16. Select and connect to the "Smart Life-xxx" network. Once connected, return to the App. If the
device has been added successfully will be a message on the Home page, after that you can click on
● In heating mode, press the "MODE" and " " button at the same time will enter/exit the low temperature heating function.
● "LA" icon is showed on the remote after entered into the low temperature heating function, fan speed is default to Auto and non-adjustable.
the air conditioner for operations.
● When switching from one mode to another mode, low temperature heating function is cancelled. Turn off and then turn on air conditioner that
will remain the low temperature heating function. After powered on, the low temperature heating mode is defaulted off state.
● In the low temperature heating mode, "SLEEP" function and "Low temperature heating" function cannot start at the same time.
● After entering the low temperature heating function, to cancel the QUIET or TURBO function, after the exit will be restored to the state before
entering.
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
COMMERCIALE@TEKNOPOINT.COM – WWW.TEKNOPOINT.COM
MUI_DELFIN_Ita_Eng_Fra_Deu_SKY/Rev.00/Data 03.06.2020
47
ENGLISH
61