Care, Maintenance And Disposal; General; Every Time Before Starting Up; Every Time The Wirespool Is Exchanged - Fronius Robacta Twin Compact Bedienungsanleitung

Care, maintenance and disposal

General

Regular preventive maintenance of the welding torch is essential if troublefree
operation is to be ensured. The welding torch is subjected to high temperatures
and heavy soiling. For this reason, the torch needs more frequent maintenance
than other components of the welding system.
IMPORTANT! When removing welding spatter, avoid making any drag-lines and
scratches. Future welding spatter could get lodged firmly in these.
-
Every time befo-
-
re starting up -
-
-
*
Every time the -
wirespool is ex-
-
changed -

Disposal

Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally-friendly way, in accordance with the European Di-
rective and national legislation. Used equipment must be returned to the distri-
butor or disposed of via an approved local collection and disposal facility. Cor-
rect disposal of used equipment promotes the sustainable recycling of material
resources. Failing to dispose of used equipment correctly can lead to adverse he-
alth and/or environmental impacts.
Packaging materials
Separate collection according to material. Check your local authority regulations.
Crush containers to reduce size.
32
Do NOT bend the torch neck
Check the contact tubes
If the contact tubes are worn out, exchange them for new ones
Clean welding spatter out of the gas nozzle
In case of not removable impurities exchange gas nozzle
Check the spatter-guard and all insulation pieces for damage
Recommended: Exchange the inner liner
Clean the wirefeed hose with reduced-blow compressed air
Clean all wearing parts before fitting them