Webasto ThermoConnect Bedienungsanleitung Und Einbauanweisung Seite 6

4 Mobile phone app
Fig.3 App touchscreen
Not all settings can be controlled
using the app. More settings are
available in the web service.
See "5 My WebastoConnect
web service" on page 6.
ThermoConnect is operated using any
network-connected compatible mobile
phone with the Webasto ThermoConnect
app.
4
4.1 Overview of app symbols and
meaning
Sym- Item Sym-
bol bol
Interior tem-
perature
Subscription
status
Heater
Timer
Driver´s log
4.2 Menu
Touch the menu symbol (top right of the
screen). The following menu items are
available:
■ Add device
Add another ThermoConnect. Type name
to identify ThermoConnect and use QR
code scanner to scan the QR code of the
ThermoConnect.
■ Modify settings
Change name and show QR code. 'Con-
firm state changes' will switch confirma-
tion pop-ups in the app on or off.
■ Remove device
Remove connected ThermoConnect from
Item
the app.
■ Add control
Setup an external input or output (op-
Battery volt-
tional, not supported by Webasto).
age
■ QR code
Messages
Shows the QR code of the connected
ThermoConnect.
Alarms /
■ About ThermoConnect
Geofence
Version and license information.
Vehicle loca-
4.3
tion
Touch the
My Webas-
heater immediately.
toConnect
Touch and hold
login
change duration.
Touch and hold the the
set the heating duration. When heater is
active the bar beneath the heater symbol
turns green and the remaining run time is
shown.
Default heating time can be
changed in My WebastoConnect,
Settings, Outputs. Select the heater
and change default time under
'Timeout'.
4.3.1 Setting a Timer
Touch symbol to set a timer.
Touch 'Add Timer'. Select 'Start Time' or
Heater
symbol to switch on
symbol to
symbol to