User Management; Legal Requirements; Technical Data - Webasto ThermoConnect Bedienungsanleitung Und Einbauanweisung

15.4 User management

More than one user may use
ThermoConnect. When adding new users
(see "15.3 Connecting mobile phone (app
is installed)" on page 14), an identifica-
tion message is required from the new
user. An existing user receives this mes-
sage as a notification in their app. Exist-
ing user must confirm or deny a new
user.
If user gets a new phone and tries to pair
the mobile phone with ThermoConnect,
the confirmation can be done by using
push button.
Pair (new) mobile phone with
ThermoConnect:
Press and hold the push button for
X X
10 s.

16 Legal requirements

Regulation Typ approval number
ECE R10 10R - 04 0110
E
17
The stipulations of these regulations are
binding in the area covered by EU Direc-
tive 70/156/EEC and/or 2007/46/EC (for
new vehicle models from 29/04/2009)
and should also be observed in countries
where there are no specific regulations.
Failure to follow the installation instruc-
tions and the notes contained therein will
lead to all liability being refused by We-
basto.
WEEE directive
This symbol indicates that this
product is not to be disposed of
among regular household
waste, according to WEEE di-
rective 2012/19/EC and your national
law. This product must be handed over
to a designated collection point or to an
authorized collection site for recycling
waste electrical and electronic equipment

17 Technical data

ThermoConnect
Supply voltage +9V...+32V
Operating tem-
-40...+80C
perature
Typical current
consumption in <60mA (12V)
idle
15