Scope Of Delivery - Webasto ThermoConnect Bedienungsanleitung Und Einbauanweisung

2 Scope of delivery

1
2
3
4
5
Fig.1 ThermoConnect and Accessories
1. ThermoConnect
2. Wiring harness
3. External GSM antenna (lilac connector)
4. External GPS antenna (blue connector)
5. Push button (with illumination and
temperature sensor)
3 Operating push button
Fig.2 Push button
The push button is located within the
driver's reach.
Switch the air- or water heater on or off
with a default duration (60 min).
Press the push button to start the air-
X X
or water heater.
If necessary the default duration can be
changed. See "5 My WebastoConnect
web service" on page 6.
3.1 Connect mobile phone using
push button:
Let a mobile phone connect with
ThermoConnect using push button.
Scan QR code in door pillar (See "15.2
X X
App installation (QR code)" on page
13)
Press and hold push button for 10 s.
X X
Mobile phone will connect to
ThermoConnect.
■ See "15.4 User management"
on page 15.
■ Push button includes a tem-
perature sensor. Make sure
air can flow around the push
button.
3