Scheppach C-OBS125-X Originalbetriebsanleitung Seite 30

Grinding wheel
Resonant circuit
Weight (without battery)
Subject to technical changes!
Noise and vibration
WARNING
Noise can have serious effects on your health. If the machine noise exceeds 85 dB, please wear
suitable hearing protection for you and persons in the vicinity.
The noise and vibration values have been determined in accordance with EN 62841-1.
Noise data
Sound pressure L
pA
Measurement uncertainty K
Sound power L
wA
Measurement uncertainty K
Vibration parameters
Vibration a
h
Measurement uncertainty K
The total vibration emission values specified and the device emissions values specified have been
measured in accordance with a standardised test procedure and can be used for comparison of one
electric tool with another.
The total noise emission values specified and the total vibration emission values specified can also
be used for an initial estimation of the load.
WARNING
The noise emission values and vibration emission value can vary from the
specified values during the actual use of the power tool, depending on the
type and the manner in which the electric tool is used, and in particular the
type of workpiece being processed.
Try to keep the stress as low as possible. For example: Limit working time. In doing so, all parts of
the operating cycle must be taken into account (such as times in which the power tool is switched
off or times in which it is switched on, but is not running under a load).
7 Unpacking
WARNING
The product and the packaging material are not children's toys!
Do not let children play with plastic bags, films or small parts! There is a danger of choking
or suffocating!
• Open the packaging and carefully remove the product.
30 | GB
pA
wA
www.scheppach.com
Ø 125 mm
2 mm
1 kg
75.0 dB
3 dB
83.0 dB
3 dB
2
9.353 m/s
2
1.5 m/s