Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Residual risks
The product has been built according to state-of-the-art and the recognised technical safety
rules. However, individual residual risks can arise during operation.
• Damage to hearing if the stipulated hearing protection is not worn.
• Residual risks can be minimised if the "Safety Instructions" and the "Intended Use" together with
the operating manual as a whole are observed.
• Use the product in the way that is recommended in this operating manual. This is how to ensure
that your product provides optimum performance.
• Furthermore, despite all precautions having been met, some non-obvious residual risks may still
remain.
WARNING
This power tool generates an electromagnetic field during operation. This field can impair active or
passive medical implants under certain circumstances. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with medical implants consult with their physician and
the manufacturer of the medical implant prior to operating the power tool.
WARNING
In case of extended working periods, the operating personnel may suffer circulatory disturbances
in their hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that causes the small blood vessels on the fingers and
toes to cramp in spasms. The affected areas are no longer supplied with sufficient blood and there-
fore appear extremely pale. The frequent use of vibrating products can cause nerve damage in
people whose circulation is impaired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working immediately and seek medical advice.
ATTENTION
The product is part of the 20V IXES series and may only be operated with batteries of this series.
Batteries may only be charged with battery chargers of this series. Observe the manufacturer's in-
structions.
WARNING
Follow the safety and charging instructions and correct usage given in the in-
struction manual of your 20V IXES Series battery and charger. A detailed de-
scription of the charging process and further information are provided in this
separate manual.
6
Technical data
Cordless orbital sander
Engine voltage
Idle speed
Oscillation rate
www.scheppach.com
C-OBS125-X
20 V
3000 - 12000 rpm
6000 – 24000 rpm
GB | 29
Werbung
