Technical Data; Unpacking; Assembly - Scheppach BCAG125-20ProS Original Bedienungsanleitung

• Recharge the batteries indoors only because
the battery charger is designed for indoor use
only. Risk of electric shock.
• To reduce the electric shock hazard, unplug the
battery charger from the mains before cleaning
the charger.
• Do not subject the battery to strong sunlight
over long periods and do not leave it on a heat-
er. Heat damages the battery and there is a risk of
explosion.
• Allow a hot battery to cool before charging.
• Do not open up the battery and avoid mechani-
cal damage to the battery. Risk of short circuit
and fumes may be emitted that irritate the res-
piratory tract. Ensure fresh air and seek medical
assistance in the event of discomfort.
• Do not use non-rechargeable batteries. This
could damage the appliance.
Residual risks
The machine has been built according to the state of
the art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the „safety in-
structions" and the „Proper use" are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine.
• Use the tool that is recommended in this manual.
This ensures that your machine performs optimally.
• Hands may never enter the processing zone when
the machine is in operation.

7. Technical data

Motor power supply:
Rated speed:
Max. wheel diameter:
Bore diameter:
Mounting spindle thread:
Weight:
Subject to technical changes!
Noise and vibration
m WARNING
Noise at the workplace can exceed 85 dB (A). In this
case, noise protection measures are necessary for
the user (wear hearing protection!).
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Noise output
Sound power level L
Sound pressure level L
Uncertainty K
Vibration value
Vibration a
Uncertainty K

8. Unpacking

• Open the packaging and remove the device care-
• Remove the packaging material as well as the
• Check that the delivery is complete.
• Check the device and accessory parts for transport
• If possible, store the packaging until the warranty
• Familiarize yourself with the machine with the help
• Use only original parts for accessories as well as
• Please quote our article numbers as well as type
m WARNING
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swallow-
ing and suffocation!

9. Assembly

m WARNING
Always remove the battery pack before making ad-
20 V
justments to the equipment.
8500 min
-1
9.1 Fitting the additional handle (Fig. 3)
ø 125 mm
• The angle grinder must not be used without the ad-
22,23 mm
• The additional handle can be secured in any of the
M 14
1,8 kg
Tool side
Left (Pos. A)
Right (position B /
as shown)
Top (position C)
98,1 dB(A) (EN ISO 3744)
WA
87,1 dB(A) (EN ISO 11201)
pA
3 dB(A)
wa/pA
8,36 m/s²
h
1,5 m/s²
h
fully.
packaging and transport bracing (if available).
damage. Inform the transport agent immediately of
any faults. Later complaints cannot be considered.
period has expired.
of the operating instructions manual before using it.
consumables and spare parts. Spare parts can be
obtained from your specialist retailer.
and production year in all your orders.
ditional handle (6).
three positions (A, B, C):
Suitable for
Right-handed users
Left-handed users
Using cutting wheels
GB | 25