Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b) Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batter-
ies may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f)
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures out-
side the specified range may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replace-
ment parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by
the manufacturer or authorized service providers.
Special safety instructions for cordless orbital sanders
WARNING
–
Dusts from materials such as paint containing lead, some types of wood and metal can be
harmful to health.
–
Touching or inhaling such dust may pose risks for the operator or bystanders.
–
Wear safety goggles and a dust mask!
1.
Secure the workpiece. A workpiece held with a clamping device or bench vice is held more se-
curely than with your hand.
2.
Only use the electric tool for dry sanding. Do not scrape wet materials. Water penetrating
an electric device increases the risk of an electric shock.
3.
Avoid overheating the grinding material and the grinder. There is a risk of fire.
4.
The workpiece becomes hot during machining. Do not touch the machined area, let it cool
down. There is a risk of burns. Do not use coolant or similar.
5.
Always empty the dust bag before work breaks. Grinding dust in the dust bag, microfilter, pa-
per bag (or in the filter bag or filter of the vacuum cleaner) can self-ignite under unfavourable
conditions, such as flying sparks when grinding metals. There is a particular danger if the grind-
ing dust is mixed with paint, polyurethane residues or other chemical substances and the sand-
ing material is hot after working for a long time. Also refer to the operating instructions of your
hoover to see if it is suitable for vacuuming up sanding chips.
6.
Avoid processing materials that are harmful to health, such as asbestos or lead-based paints.
7.
Wait until the product has come to a standstill.
28 | GB
www.scheppach.com
Werbung
