Control Leds; Special Parameters - REHM MEGAPULS 250 Betriebsanleitung

24

3.10 Control LEDs

Symbol
Hold function[7]
Hold
Rotating button,
active [6]
O
Rotating button,
active [8]
O

Special parameters

[12]
O
3.11 Special parameters
The special parameters allow the user to modify basic machine settings and
welding parameters and adapt them to their requirements.
Description
After completing the welding procedure, the digital displays
for energy and voltage show the final welding values for
welding current and voltage for approximately 7 seconds.
The control LED Hold lights during this period (Hold time).
When the LED is lit, the welding energy, the wire feed rate or
the material thickness can be modified using the rotating
button [15].
When the LED is lit, the arc length, the welding voltage or
the arc rigidity can be modified using the rotating button [14].
Shows that the Special parameters menu is active.
Functional description