Hitachi YUTAKI M Bedienungsanleitung Seite 63

6.4.2.11 SSW1
◆ Remote/Local
SSW1
Factory setting
Local operation

NOTE
• For units using a Mirror box accessory, SWW1 must be changed to Local.
• When DSW4#1 is OFF and it is not required any combination with Mirror box accessory, set
SSW1 to Local in order to operate without Remote Controller.
6.4.2.12 SSW2
◆ Heat/Cool
SSW2
Factory setting (Heat operation in case of Local)
Cool operation in case of Local
6.4.2.13 LED indication
Name Colour
LED1 Green
LED2 Red
LED3 Red
LED4 Yellow
LED5 Green
LED6 Yellow
LED7 Yellow
PMEN0647 rev.0 - 11/2023
Power indication
Power indication
Heat pump operation (thermo ON/OFF)
Alarm (flickering with 1 sec interval)
Not used
H‑Link transmission
H‑Link transmission for unit controller
Indication
Remote
Local
Remote
Local
Heat
6
Cool
Heat
Cool
55