Reuse / Durability; Disposal / Environmental Compatibility; Possible Faults - Interco Simply Gebrauchsanweisung

Check of setting / function
Seat adjustment
Folding mechanism
Back angle adjustment
Push bar
Screw connections
Options
Appearance (visual inspection)
Paintwork
Cleanliness
Rating plate

12. Reuse / durability

Your product can be reused under certain conditions
It is CE marked and must be reconditioned for reuse
by the manufacturer to meet all essential safety and
performance requirements This includes that it is
properly adapted to the needs of the new user In par-
ticular, individual fittings can only be reinstated after
professional adaptation to the new patient Accompany-
ing documents, as well as these operating instructions,
are part of the product and must be handed over to the
new user when it is to be reused again The durabil-
ity and service life of the product are not limited and

13. Disposal / environmental compatibility

Environmental protection is important Therefore in-
terco does not work with hazardous substances and
tries to integrate environmental aspects into its daily
work and thinking and to pass these approaches on to
our suppliers if necessary All employees are frugal in
using the resources provided to us

14. Possible faults

All serious incidents and faults occurring in connec-
tion with the product and its use must be reported im-
mediately to the specialist dealer Furthermore, you
can inform the Compliance Officer of interco and the
competent authority in your country
52
REUSE / DURABILIT Y
Performance test
Folding mechanism
Locking mechanism
Performance test
Height adjustment mecha-
nism
Locking mechanism
Size and length
Completeness
Damages
Loctite secured
Covering caps available
Wheel protector
Spoke protector
E-Fix
Centered foot rest
OK Damage/
distortion



















may vary They depend on the conditions of use and the
environment In addition, daily use and the degree of
disability can affect the durability and service life of the
product Regular inspection and the performance of all
necessary service and maintenance work can positively
influence the durability and service life of the product
The product service life depends on the usage and
environmental conditions and can be assumed to be
2 - 8 years
All packaging materials are recyclable interco partici-
pates in the Dual System so that environment-friendly
disposal of transport packaging is ensured The product
can be broken down into its individual material compo-
nents at the end of its useful life Dispose of these raw
materials, depending on their type, in accordance with
the applicable environmental protection regulations
Your Compliance Officer at interco:
Ute Markwald (E-mail: msib@interco-rehade)
Exchange/
replacement
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 