Sentiotec PRO C2 Montage- Und Gebrauchsanweisungen Seite 47

Instructions for installation and use
Thermal safety
Heater sensor with overheat cut-out (139°C cut-out temperature)
Adjustable automatic heating period (6 h, 12 h, 18 h, 24 h)*
Optional single-sensor mode or two-sensor mode
Connection cables
Power supply cable:
Heater supply cable (temperature-resistant up to 150°C): min. 2.5 mm²
Sensor cables (temperature-resistant up to 150°C):
Light cable:
Fan cable:
p. 47/47
min. 5 × 2.5 mm²
min. 0.5 mm²
min. 1.5 mm²
min. 1.5 mm²
EN