Starting The Fan; Setting The Preset Time - Sentiotec PRO C2 Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.7. Starting the fan

When the dimmer switch function is activated
When the dimmer switch function for the fan is activated, the power for the fan
can be set to a scale of 0 to 100. At 0, the fan is switched off. The value of 100
corresponds to full power.
1. Turn the function selector 2 to position E (fan).
► The fan symbol lights up.
2. Use the intensity selector 3 to set the preferred power of the fan.
3. Press the intensity selector 3.
► The fan switches on.
► The intensity selector 3 lights up.
When the dimmer switch function is deactivated
When the dimmer switch function for the fan has been deactivated, you can only
switch the fan on and off. The device will always operate at full power.
1. Turn the function selector 2 to position E (fan).
► The fan symbol lights up.
► In the intensity display, "OFF" appears.
2. Press the intensity selector 3.
► The fan switches on.
► The intensity selector 3 lights up.
► In the intensity display, "ON" appears.

10.8. Setting the preset time

You can set the preset time to the minute. The maximum preset time totals
24 hours. The preset time is shown in hours and minutes, e.g. 8 hours and
15 minutes is shown as 8.15.
WARNING!
Risk of fire
Combustible objects that are placed on the heater will ignite and cause
fires.
● NEVER place combustible objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before you activate the preset timer function.
p. 37/47
EN