Cancelling The Preset Time Feature; Setting The Duration - Sentiotec PRO C2 Montage- Und Gebrauchsanweisungen

Instructions for use for the user
1. Start the functions to be started after the preset time.
2. Turn the function selector 2 to position F (preset time).
► The most recently set preset time is shown in the intensity display 4.
3. Use the intensity selector 3 to set the preferred preset time.
4. Press the intensity selector 3.
► The sauna control unit changes to standby mode and the timer starts
running.
► The remaining preset time is shown in the intensity display 4.
► The preset time symbol flashes.
► The intensity selector 3 lights up.
► Once the preset time has elapsed, the selected functions are started.

10.9. Cancelling the preset time feature

● Press the intensity selector 3 to cancel the preset time function.
► The preset time countdown is cancelled.
► The preset time symbol lights up and stays lit.

10.10. Setting the duration

When you start the sauna, you can already determine how long the sauna is to
operate. In this case, the maximum heating time cannot be exceeded (e.g. 6 h
for private saunas). The duration is shown in hours and minutes, e.g. 3 hours
and 15 minutes is shown as 3.15.
1. Turn the function selector 2 to position G (duration).
► The most recently set duration is shown in the intensity display 4.
2. Use the intensity selector 3 to set the preferred duration.
3. To save the duration permanently, press the bottom knob for three seconds
(long press).
► The bottom knob lights up 4 times - the setting is saved.
● Press the intensity selector 3 and turn it at the same time.
► The preset time or duration changes in increments of one hour.
p. 38/47