Sentiotec PRO C2 Montage- Und Gebrauchsanweisungen Seite 30

Installation instructions, only for experts
3. Turn the bottom knob to the left.
► In the bottom display, "OFF" appears.
► The dimmer switch function for the fan is deactivated.
Activating the safety shut-off/door sensor
The safety shut-off is activated as standard. If you wish to activate the door-open
sensor function, perform the following steps:
1. Open the technician menu (see 26).
2. Turn the top knob to the fan symbol (position J – see point 9.2 on page 31).
► The remote start symbol flashes.
► "SdO" appears in the top display.
► "SAFE" appears in the bottom display.
3. Turn the bottom knob to the right.
► "door" appears in the bottom display.
► The door sensor is activated.
Querying the software version
To query the software version of your sauna control unit, carry out the following
steps:
1. Open the technician menu (see 26).
2. Turn the top knob to the eco symbol (position I – see point 9.2 on page 31).
► The software version "5.00.5" will appear in the top display.
Exiting the technician menu
● Press the bottom knob for one second.
► The bottom knob stops flashing.
► The top knob lights up.
► The technician menu closes.
► Your settings were saved.
p. 30/47