Starting Sauna Mode; Starting Combi Mode (Pro C3 Only) - Sentiotec PRO C2 Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.3. Starting sauna mode

WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place combustible objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
1. Turn the function selector 2 to position A (temperature).
► The temperature symbol lights up.
2. Use the intensity selector 3 to set the preferred temperature.
3. Press the intensity selector 3.
► The sauna heater is switched on and begins to heat up.
► The intensity selector 3 lights up.
► Then the current temperature in the sauna cabin is displayed in the intensity
display 4. In single-sensor mode, the preset temperature is displayed.

10.4. Starting Combi mode (PRO C3 only)

1. Turn the function selector 2 to position A (temperature).
► The temperature symbol lights up.
2. Use the intensity selector 3 to set the preferred temperature.
3. Press the intensity selector 3.
► The sauna heater is switched on and begins to heat up.
► The intensity selector 3 lights up.
► Then the current temperature in the sauna cabin is displayed in the intensity
display 4. In single-sensor mode, the preset temperature is displayed.
4. Turn the function selector 2 to position B (humidity).
► The humidity symbol lights up.
► The light on the intensity selector 3 goes out.
5. Use the intensity selector 3 to set the preferred humidity.
p. 33/47
EN