Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fault
Display shows "MO-
TOR OVERLOAD".
Display shows "ARM
OPEN".
Display shows
"CHECK BOWL".
Display shows "ER-
ROR" "SCALES".
1
Depending on the appliance specifications
Cause and troubleshooting
Processing quantity is too great or processing time
was too long.
▶
Set the rotary switch to
Reduce the quantity of ingredients.
▶
▶
Allow the appliance to cool down to room temperat-
ure.
Appliance or accessory is blocked.
▶
Set the rotary switch to
Remove the blockage.
▶
Motor is defective.
▶
If this message keeps on appearing, contact Cus-
tomer Service.
→ "Customer Service", Page 61
Swivel arm was opened.
Set the rotary switch to
1.
Move the swivel arm until it engages correctly.
2.
Bowl or bevel gear is not fitted properly or has be-
come detached.
Turn the bowl anticlockwise as far as possible.
▶
▶
Attach the bevel gear as described in the instruc-
tions for the accessory.
Appliance has been moved on the work surface.
1
▶
Lift the appliance and set it down again.
Reset the scales.
▶
→ "Resetting scales", Page 52
Scales are not working properly.
▶
Reset the scales.
→ "Resetting scales", Page 52
Scales are defective.
▶
If this message keeps on appearing, contact Cus-
tomer Service.
→ "Customer Service", Page 61
Scales are exposed to vibrations.
Do not use the appliance on work surfaces ex-
▶
posed to vibrations, e.g. with a dishwasher running.
Troubleshooting en
.
.
.
59
Werbung
