Bosch 8 OptiMUM-Serie Gebrauchsanleitung Seite 51

a The appliance stops processing
automatically and the display
shows "ROTATE THE SWITCH TO
0".
Set the rotary switch to
5.
9.5 Using the timer without
processing
If the display is switched off, press
1.
any button.
Press ⁠ .
2.
a The display shows "TIMER" and
"00:00".
Use or to set the required
3.
duration.
To start the timer, briefly press
4.
twice.
a The display counts down the re-
maining time.
a Once this time has elapsed, a sig-
nal tone sounds and the display
shows "END""TIMER".
9.6 Pausing or switching off
the timer
Requirements
¡ The timer is running.
¡ The display shows the time that
has elapsed.
Briefly press
1.
a The timer stops.
a The remaining time is displayed
continuously.
Briefly press
2.
a The timer starts again.
a The remaining time continues to
count down.
To switch the timer off, press and
3.
hold down
a The display shows "OptiMUM".
1
Depending on the appliance specifications
⁠ .
twice.
twice.
⁠ .
10 Scales 1
Your appliance is equipped with a set
of scales. You can weigh ingredients
individually or a preset a weight.
The base unit has 4 weight sensors
in its feet.
The following factors can falsify the
measuring result:
¡ Feet not standing on the work sur-
face properly
¡ Work surface vibrating
¡ Objects underneath the base unit
¡ Ingredient quantities less than 5 g
or 0.01 lb
¡ Base unit slipped
¡ Base unit touched
¡ Objects on the base unit
10.1 Display values of scales
Observe the following values when
using the scales.
Display unit in grams
Display range
Display steps
Settings range
Settings steps
Display unit in pounds
Display range
Display steps
Settings range
Settings steps
Tip: You can change the display
units of the scales at any time.
→ "Overview of basic settings",
Page 49
Scales en
-990 g to 5000 g
5 g
50 g to 3000 g
10 g
-2.20 lb to
11.00 lb
0.01 lb
0.10 lb to 6.60 lb
0.02 lb
51