Bosch 8 OptiMUM-Serie Gebrauchsanleitung Seite 45

Tool Use
¡ Fold ingredients into the
dough, e.g. seeds.
Professional flexible
stirrer
¡ Mix dough, e.g. cake
mixture, fruit flan.
¡ Fold ingredients into the
dough, e.g. raisins,
chocolate chips.
Professional beating whisk
¡ Beat whipped egg
whites and cream (at
least 30% fat).
¡ Mix light dough, e.g.
sponge mixture.
1
Depending on the model
Fine adjustment of the
professional whisk
Use the fine adjustment system to
correct the distance between the
bowl and the professional beating
whisk.
Note: The professional beating whisk
is factory-set so that ingredients are
mixed together perfectly.
Correcting tool adjustment
ATTENTION!
The appliance and tools can be dam-
aged if a wrong tool setting is used.
▶
Never operate a tool that touches
the bowl.
Requirements
¡ The mains plug is not inserted.
¡ The swivel arm is open.
¡ The professional beating whisk is
inserted.
¡ The bowl has been inserted.
Hold the beating whisk at the bot-
1.
tom with one hand and release the
lock nut clockwise using a spanner
wrench.
→ Fig.
4
1
Familiarising yourself with your appliance en
To change the distance, turn the
2.
tool.
→ Fig.
5
Observe the values in the table:
Setting
Optimum set-
ting
One turn clock-
wise
One turn anti-
clockwise
Press the release button and push
3.
the swivel arm down until it en-
gages.
Check the setting.
4.
Press the release button and raise
5.
the swivel arm until it engages.
Hold the beating whisk at the bot-
6.
tom with one hand and tighten the
lock nut anticlockwise using a
spanner wrench.
5.9 Safety systems
You can find an overview of your ap-
pliance's safety systems here.
Start lock-out
Start lock-out prevents your appli-
ance from being switched on acci-
dentally.
The appliance can only be switched
on and operated if
¡ the swivel arm is engaged in posi-
tion 1 and the bowl is inserted.
¡ the swivel arm is engaged in posi-
tion 1 and the bevel gear is fitted
on the main drive.
Restart lock-out
Restart lock-out prevents your appli-
ance from automatically restarting
processing after a power failure.
Distance
3 mm
1 mm more
1 mm less
45