ABB FCM2000 Inbetriebnahmeanleitung Seite 40

Safety
Pos: 3.17 /Standard-Layout/Sicherheit/Durchfluss/Allgemein/Sicherheitshinweise zur elektrischen Installation (Durchfluss) @ 0\mod_1129733762419_3101.doc @ 3267 @ 2 @ 1
1.8 Safety instructions for electrical installation
The electrical connection may only be made by authorized specialist personnel according to the
electrical plans.
The electrical connection information in the manual must be observed; otherwise, the electrical
protection type may be adversely affected.
Ground the measurement system according to requirements.
Pos: 3.18 /Standard-Layout/Sicherheit/Durchfluss/Allgemein/Sicherheitshinweise zum Betrieb (Durchfluss) (2009-04-22 11:20:53) @ 26\mod_1236260399046_3101.doc @ 247753 @ 2 @ 1
1.9 Safety instructions for operation
During operation with hot fluids, contact with the surface may result in burns.
Aggressive fluids may result in corrosion or abrasion of the parts that come into contact with the
medium. As a result, pressurized fluids may escape prematurely.
Wear to the flange gasket or process connection gaskets (e.g., aseptic threaded pipe
connections, Tri-Clamp, etc.) may enable a pressurized medium to escape.
When using internal flat gaskets, these can become embrittled by CIP/SIP processes.
Warning – Risk to persons!
Bacteria and chemical substances can contaminate or pollute pipeline systems and the
materials they are made of.
The appropriate installation conditions must be observed in order to achieve an installation
that complies with EHEDG requirements.
For an installation to comply with EHEDG requirements, the process connection/gasket
combinations created by the operator must always be made of parts that conform to EHEDG
stipulations (EHEDG Position Paper: "Hygienic Process connections to use with hygienic
components and equipment").
Pos: 4 /Standard-Layout/======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 @ @ 1
6 - EN CoriolisMaster FCM2000 CI/FCM2000-EN