Purpose Of Use; Safety Instructions; Functional Requirements - perma-trade solvent primus 2.1 Bedienungsanleitung

1. PURPOSE OF USE

PT-P25-2.1, PT-P40-2.1, PT-P40-2-2.1 and PT-P40-3-2.1
permasolvent primus 2.1 systems work according to the physical principle of limescale reduction
through accelerated crystal nucleation. The environmentally friendly process largely stabilises the
dissolved lime in the water, which leads to a reduction of limescale formation in drinking water
pipes and their downstream fittings as well as drinking water heating systems.
PT-PV25-2.1
primus vital 2.1 systems are a product combination of DVGW-certified limescale protection and
TÜV-tested permasolvent vital units. The additional permasolvent vital unit gives the water back
its original, vitalising properties through water turbulence based on Viktor Schauberger and
alternating magnetic fields.

2. SAFETY INSTRUCTIONS

Please always follow the operating instructions.
The units may only be used for their intended purpose and in perfect condition.
Any other use or use beyond this is considered improper. The contents of the operating
instructions and the locally applicable regulations on drinking water protection, accident
prevention and occupational safety must be observed.
Any faults that may affect safety must be rectified immediately. All installation, commissioning
and service activities may only be carried out by authorised specialists.

3. FUNCTIONAL REQUIREMENTS

permasolvent primus 2.1 systems are suitable for: Drinking water according to TrinkwV.
In addition to the Drinking Water Ordinance, the following conditions must be met:
- Water from a water hardness of 12°dH (21.5°fH) to max. 40°dH (71°fH)
- Water with a carbonate hardness of 6°d (11° f) and above
- pH values between 7.0 and 9.5
- Water temperatures up to max. 30 °C (storage tank temperature max. 80 °C)
- Ambient temperatures up to max. 40 °C
- Upstream pressure up to max. 10 bar
64