Operation - CapsoVision CapsoAccess CDAS3 Bedienungsanleitung

6. Operation

Verify that the capsule has been cleaned and
disinfected and is completely dry.
Inspect the inside of the CapsoAccess® Capsule
Data Access System receptacle and remove
any obstructions.
Turn ON the system power switch.
USB
The light on the front of the system should
illuminate.
6
POWER ON/OFF
POWER SWITCH
IFU-2800 Ref F 03/2020
Place the capsule into the system receptacle
battery-end up and close the lid of the system.
The download operation will fail with an
incorrectly oriented capsule.
Batteries
Start the CapsoView software. To begin the
download process, click the Download icon and
follow the on-screen instructions. Refer to the
CapsoView Instructions for Use.
After all capsule downloads are completed,
the system may be turned OFF.