SystemAir SAVE VTR 100/B Betriebs- Und Wartungsanleitung Seite 70

70 | Accessories
Configuration
1. Go to Service menu
2. Enter password (default 1111)
3. Go to Input menu. Select UNIVERSAL tab.
4. Select the universal input to which wire from the push
button is connected.
If, for example, it is connected to UI3 on the connection
board, then select UNIVERSAL INPUT 3. Set signal
type as Digital Input and select your desired
function.
Pressing a push button will activate your selected function.
GB
212193 | v04