Temperature Settings; Eco Mode - SystemAir SAVE VTR 100/B Betriebs- Und Wartungsanleitung

GB
Modes are listed from the highest to lowest priority; A — user modes that can be activated from the control panel; B —
user modes and functions activated via digital input
7.5.2

Temperature settings

Temperature can be set at SET TEMPERATURE menu accessible from the home screen by touching
TEMPERATURE icon with thermometer. Default temperature value is 18°C (range 12–30°C).
Then touch the OK button to confirm changes.
Temperature set point is for room air temperature, supply air temperature or for extract air temperature depending on
which control mode is active. Default setting is Supply air temperature control.
Control mode of the temperature can be changed in Service menu.

7.5.2.1 ECO mode

ECO mode is a power saving function that can be activated in SET TEMPERATURE menu.
ECO mode function is available only when an internal heater is installed and configured.
While ECO mode is active, a temperature setpoint at which heater is activated is lowered to avoid activation of the heat-
er during cold nighttime.
212193 | v04
Fig. 19 Hierarchy of user modes and digital inputs
Use up and down arrows or a slider to change the value.
31
Configuration |