Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using the power supply
7.
Device configuration
Part 1: The menu
Profile
This is an overview of the parameter pages,
starting from the menu
Profile. The red
colored menu is only displayed if the option
„internal resistance" is unlocked.
+
Profile +
The profiles are intended to minimize to time needed to set up
the device at alternating users or to keep user defined settings
for repeating applications. The last used profile is always loaded
after the unit is switched on.
The menu entry
Profile
General settings
Supervision
Load profile
Save profile
General settings +
The menu entry
General settings
where the operation mode, the display itself and the handling
(adjustment) of the unit can be configured:
Setup operation mode
Preset list
Adjust limits
Control panel
Display
Operating Guide
PSI 8000 T Series
leads you to following selection:
leads to following selection
Supervision +
The menu entry
Supervision
where alarms, warnings and signals, as well as the corresponding
supervision limits and reaction times are set up.
U thresholds
I thresholds
Step response
Load profile +
Load profile from user profile = {default, 1..4}
The current profile is replaced by the selected one.
Save profile
+
Save profile to user profile = {1..4}
The current profile can be stored into one out of four profiles.
Date: 02-05-2016
EN
leads to following selection
51
Werbung
Kapitel
Inhaltsverzeichnis
