Inhaltsverzeichnis
Werbung
To disconnect the connection to the displayed
device,
press the
button
- or -
Press the rotary control to open the menu.
Select the "DISCONNECT" menu item.
Note:
The "DISCONNECT" menu item is shown only if
the device is connected.
The display briefly shows "DISCONNECTED"
and you are returned to the device list.
Note:
If the device was not connected, the display
briefly shows "NO CONNECTION".
To unpair the displayed device,
press the
button for approx. 2 seconds.
- or -
Press the tuning button to open the menu.
Select the "DELETE" menu item.
Press the rotary control and the display briefly
shows "DELETED" and you are returned to the
device list.
Note:
If a telephone is unpaired, the numbers stored
for this telephone and a phone book trans-
ferred from this cell phone are automatically
deleted.
To select the device shown as master telephone,
press the tuning button to open the menu.
Select the "SET AS MASTER" menu item.
Note:
The "SET AS MASTER" menu item is shown
only if two cell phones are simultaneously
connected with the car sound system.
Press the tuning button and you are returned
to the device list, and an asterisk symbol
(
) is shown next to the Bluetooth®
name of the device.
To unpair all the cell phones or streaming devices,
select the "DELETE ALL" menu item.
Press the tuning button and the display shows
"PLEASE CONFIRM".
Press the tuning button again.
The display briefly shows "EMPTY LIST".
Setting the button function for speed dial
18
DURBAN224 DAB BT
You can select whether the long press of the
button directly opens the phone of the search
function for phone book entries or activates
voice dialing.
In the Bluetooth® menu, select the "SOFTKEY"
menu item.
Press the tuning button to change the
setting.
Turn the tuning button to toggle between the
settings "SEARCH" (for search function),
"P-BOOK" (for phone book) and "VOICE" (for
voice dial).
Press the rotary control to confirm the
setting.
Adjusting the mode for Bluetooth
For the music playback, select between
Bluetooth® streaming device or Android cell
phone with app control.
In the Bluetooth® menu, select the "BT MUSIC
mode" menu item.
Press the rotary control to open the menu.
Turn the tuning button to change
between the settings.
"STREAMING MODE" (for streaming devices)
and "APP MODE" (for Android cell phones
with app control).
Press the tuning button to confirm the setting.
Activating/deactivating combined playback
Prerequisite: The cell phone must be connected
with the car sound system as a streaming device.
With the setting ON, navigation announcements
of the connected cell phone are played back
simultaneously with the respective active internal
audio source of the car sound system (e.g. radio).
In the Bluetooth® menu, select the "BT NAVI
MIX" menu item.
Press tuning button to change the setting.
Turn tuning button to toggle between the
settings ON and OFF.
Press tuning button to confirm the setting.
Adjusting volume
Only possible with activated combined playback
(BT NAVI MIX ON): This setting allows raising or
lowering the level of the navigation announce-
ments to adjust it to the level of the other active
audio source. Settings: –5 to +5.
In the Bluetooth® menu, select the "BT NAVI
GAIN" menu item.
Press tuning button to change the setting.
Bluetooth
18
22.05.19 17:00
Werbung
Inhaltsverzeichnis
