Use And Construction; Use For The Intended Purpose - BWT AQA drink 1 CAS Bedienungsanleitung

5.

USE AND CONSTRUCTION

5.1

USE FOR THE INTENDED PURPOSE

This BWT AQA drink 1 CAS water dispenser may
only be fed with cold water with drinking water
quality. Any other use is regarded as not in ac-
cordance with the intended purpose. The AQA
drink 1 CAS is a water dispenser which is con-
nected directly to the drinking water supply.
Unlimited access to clean drinking water is thus
available (depending on the filter capacity). Ide-
ally, the water dispenser can be combined with
BWT filter technology for perfect enjoyment
thanks to enrichment with magnesium.
EN
5.2 CONSTRUCTION AND FUNCTION
OF THE AQA DRINK 1 CAS
The AQA drink 1 CAS water dispenser offers
three different water options:
• cooled and still
• room temperature and still
• cooled with CO2
Fig. 1 shows the AQA drink 1 CAS water dis-
penser. The following elements are included:
on the front:
1
3
Fig. 1: Front view of the AQA drink 1 (CAS)
1 LED indicators
2 Selection buttons
3 Drip tray
Water outlet
4
26 BWT AQA drink 1 CAS
After the water dispenser has been installed
(Chapter 5), the required type of water can be
chosen. Place a glass on the grid of the drip
tray under the water outlet and choose the re-
quired type of drinking water by pressing one
of the selection buttons. Water dispensing and
UV sterilization start immediately. The control
panel for the CAS device is shown in Fig. 2
Fig. 2: Control panel of the AQA drink 1 (CAS)
Explanation of selection buttons
Cooled water, still
carbonated water with CO2
2
Room temperature water, still
Explanation of the LED indicators
4
LED indicator COLD is on when the
cold water function is on: cooled
water is available.
flashes when the drip tray/waste
water tank is full or a leak is
detected.
on when UV LED is switched on.