Controlling Sewing Speed; Foot Pressure Dial - ELNA eXcellence 720 Gebrauchsanleitung

Reset to Factory Default
It is possible to reset the machine to the factory
defaults with English language as default.
Turn OFF the power switch. Press "ENTER" key
while turning power switch ON. Message screen
appears.
Press "0" key. Message screen appears.
Press "ENTER" key to confirm and reset to factory
default.
OR
Turn off power switch to cancel the reset.

Controlling Sewing Speed

Sewing speed can be varied with the foot control.
The harder you press on the foot control, the
faster the machine runs.
The maximum sewing speed can be varied by
sliding the speed control lever. For a faster speed,
slide it to the right; for a slower speed, slide it to
the left.

Foot Pressure Dial

q
Change the pressure on the presser foot by rotating
the foot pressure dial q to move the indicator w.
Set the pressure at "3" for regular sewing.
w
Reduce the pressure to "2" for appliqué, cutwork,
drawn work, basting and embroidery.
Velours and knits with a lot of stretch may require a
"1" setting.
NOTE: Never reduce the pressure below "0".
26