Controlling Sewing Speed; Foot Pressure Dial - ELNA eXperience 660 Gebrauchsanleitung

Reset to Factory Default
It is possible to reset the machine to the factory defaults
with English language as default.
Turn OFF the power switch. Press "ENTER" key while
turning power switch ON. Message screen appears.
Press "0" key. Message screen appears.
Press "ENTER" key to confirm and reset to factory
default.
OR
Turn off power switch to cancel the reset.

Controlling Sewing Speed

Sewing speed can be varied with the foot control. The
harder you press on the foot control, the faster the
machine runs.
The maximum sewing speed can be varied by sliding the
speed control lever. For a faster speed, slide it to the
right; for a slower speed, slide it to the left.

Foot Pressure Dial

q w
Align the foot pressure dial with the setting mark at
q
"3" for regular sewing.
Reduce the pressure to "2" for appliqué, cutwork, drawn
w
work, basting and embroidery.
Velours and knits with a lot of stretch may require a "1"
setting.
15