Setting For Dual Feed Sewing - ELNA eXcellence 720 Gebrauchsanleitung

Setting for Dual Feed Sewing

q
When you use the Dual feed, attach the Dual feed as
follows.
The attaching and detaching Dual feed procedures will
be reviewed in LCD screen accordingly as you press
the key when stitch 1 is selected.
Press the key to exit the reviewing Dual feed
procedure.
To attach the Dual feed foot:
Raise the needle and presser foot q.
Loosen the thumbscrew w and remove the foot holder
w
e.
Attach the Dual feed foot r to the pressure bar t, and
tighten thumbscrew lightly. Lower the presser foot lifter
and tighten the thumbscrew securely.
e
t
r
To engage the dual feed device
q
Raise the presser foot lifter to its extra lift position q.
Lower the Dual feed device w slowly and swing
forward to the under side of the Dual feed foot until
they engage.
w
32