Inhaltsverzeichnis
Werbung
The timer (Automatic mode)
Using the timer, you can
– set a cooking time;
– set a timer for the end of a cooking pro-
cess;
– set a timer for the end of a cooking pro-
cess following a specific cooking time.
WARNING
Fire hazard!
There is an increased risk of fire in
timer mode!
Please ensure that you always ob-
serve the following when using the
timer:
• Before starting the timer, please
make sure to inform all members
of the household so that they do not
put anything flammable in the oven.
• Monitor the oven while using the
timer in order to prevent spills and
burning.
• Please note that fats, oils and al-
cohol can catch fire quickly when
heated.
• Please note that the oven is not
switched on or off by the alarm
function.
• Never leave the oven unattended
when grilling in timer mode!
Please note!
You can pre-programme up to
23 hours and 59 minutes in ad-
vance. The cooking time can be set
between 1 minute and 10 hours.
Any programming will be deleted in
the case of a power failure.
Built-in oven with digital timer 65M90D0-E11319G
Setting a cooking time
1. Press and hold the button
seconds
The status indicator
display.
2. Briefly press the
11 button again (several
times) until the indicator "
the display.
3. Press the 10 or 13 button to enter system
setting mode.
88 88
0 30
A
A
The "0" in the time setting "
as well as the display
A
4. Now use the 10 and 13buttons to set the
number of hours for the desired cooking
time.
5. Press the
11 button again.
6. Now use the 10 and 13 buttons to set the
number of minutes for the desired cooking
time.
7. Use the left toggle switch 9 to set the de-
sired cooking or baking function, and the
right toggle switch 14 to set the desired tem-
perature.
The cooking process will start. Following the
set cooking time, the appliance will automat-
ically switch to standby mode. An acoustic
signal will sound, and the indicator
flash.
Setting an end time
1. Press and hold the button
seconds
The status indicator
display.
2. Briefly press the
11 button again (several
times) until the indicator "
the display.
3. Press the 10 or 13 button to enter system
setting mode.
Operation
11 for approx. 3
17 will appear on the
" appears on
dvr
" will flash,
0: 3 0
16.
16 will
A
11 for approx. 3
17 will appear on the
" appears on
End
G B - 2 5
Werbung
Inhaltsverzeichnis
